Skip to content
104-1143-006 DANFOSS | 2000 SERIES HYDRAULIC MOTOR

104-1143-006 DANFOSS | 2000 SERIES HYDRAULIC MOTOR

$1,380.00
$1,150.00

PRODUCT DETAILS

  • Disc Valve Motor
  • Cast Iron Material
  • 7/8-14 Prort Size
  • SAE O-Ring Port
  • 2 Bolt Mount

APPLICATIONS

  • Swing motor, Brush Cutters & mowers, Harvesting equipment

FEATURES

  • Standard, wheel or bearingless configurations
  • Lowest pressure drop motor in the industry
  • Highly-efficient Geroler motor provides energy savings

OPTIONS

  • Oversized ports
  • Eight shaft configurations
  • Port reliefs
  • Speed sensors
  • Two speed
  • Manifold

SPECIFICATIONS

PORT TYPE SAE O-Ring
FLOW [MAX] 20 gal/min
GEROTER/GEROLER OPTIONS Standard
FLANGE ORIENTATION Standard
SHAFT TYPE Straight
MOUNT TYPE 2 Bolt
PAINT/PACKAGING Individual Box
DISPLACEMENT (IN³/REV) 24.03
OUTPUT TORQUE AT RATED PSI (INCH/POUNDS) 6860 in lb
DISPLACEMENT 393.8 cm3/Rev
ACCESSORIES CODE 00
INTERMITTENT PRESSURE [MAX] 170 bar
DUTY Standard-Duty
SHAFT SIZE & TYPE 1 in x 1/4 in Straight
MATERIAL Cast Iron
RPM [MIN] 191 rpm
MOUNTING TYPE CODE AC
PRESSURE [MAX] 2250 psi
INLET PRESSURE [MAX] 4500 psi
MOTOR TYPE Disc Valve
CASE DRAIN 0.4375-20 UNF-2B SAE O-Ring Port
PORT LOCATION Side Port, Staggered
FLOW RATE 75 lpm
CASE DRAIN CODE 01
PILOT DIAMETER 3.25 in
BOLT CIRCLE DIA. 4.19 in
MOUNTING HOLE SIZE 0.535 in
RPM [MAX] 191 rpm
SEAL MATERIAL Buna-N
SPECIAL FEATURES ASSEMBLY CODE 0
SERIES 2000 Series
MOUNTING HOLES 0.535 in
MAXIMUM SPEED @ CONTINUOUS FLOW 191 rpm @ 20 gal/min
CORROSION RESISTANT No
PORT SIZE & LOCATION SAE-10 Side
MOTOR ELEMENT Geroler
SPECIAL FEATURES HARDWARE CODE 00
ROTATION Standard Rotation
TORQUE 775 Nm
SPLINES 0
PAINT CODE 0
OUTPUT SHAFT CODE 01
PORT SIZE 7/8-14
PORT CODE AA
WEIGHT 42.0 LB