1 HP, 1800 RPM, 230-460 Volts, TEFC, B56C, FOOTLESS, STAINLESS, PREMIUM, TECO,

STAINLESS STEEL WASHDOWN

AEGPCW, NEMA PREMIUM, FOOTLESS C-FACE [WFPV]

APPLICATIONS:

• Any Application Where the Motor Will be Subjected to High Pressure Spray Down
• Marine Duty
• Food Processing and Packaging

FEATURES

• Output: 1 HP
• Speed: 1800 RPM
• Voltage: 230-460 Volts @ 60 Hz
• Frame: 56C
• Full Load Efficiency: 85.5%
• Full Load Power Factor: 70%
• Full Load Amperage: 1.6A
• Enclosure: Totally Enclosed Fan Cooled (IP56) (IEEE 45)
• Service Factor: 1.15 (Continuous); (1.0 @ 50 Hz)
• Insulation: Class F
• Temperature Rise: Class B
• NEMA Design B Torques
• Construction: Stainless Steel Frame / End Brackets / Hardware
• Grounding Terminal: Inside Main Conduit Box
• Conduit Box: Stainless Steel Oversized Main - F3 Mounted (IM1001)
• Ambient Temperature: Designed for < 40°C
• Elevation: Designed for < 3300 ft.
• Rotation: Bi-Directional
• Shaft: SUS304 Stainless Steel
• Rotor Construction: Aluminum Die Cast Squirrel Cage
• Bearings: Double Shielded Pre-Packed with MULTEMP SRL
• Contact Lip Type Seal on Both Ends
• Nameplate: Etched on the Stainless Steel Frame
• Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1 Part 30(3 / 4)
• Inverter Duty Speed Range: 10:1 Variable Torque / 4:1 Constant Torque
• 9 Leads
• Two Drain Holes on Bottom of Frame and one in the C-Flange
• Motors are U.L. Recognized; CSA Approved and CE Marked
• Department of Energy Efficiency Certificate # CC082A
• Motor service factor is 1.0 when operated on a VFD.
• Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG-1.