Skip to content
Char-Lynn 129-0004-002 - Innovations Parts Service,LLC

Char-Lynn (Danfoss) 129-0002-002 Hydraulic Geroler Spool Valve Motor

$685.00
$571.00

SPECIFICATIONS

Series
J-Series
Displacement
0.79 in³/r
Maximum RPM-Continuous
650 rpm
Continuous Torque
225 in
Continuous Pressure
2030 psi
Continuous Flow Rate
5.5 gpm
Motor Port Type
Straight Thread O-Ring SAE
Motor Port Size
9/16–18 UNF-2B
Shaft Type
Straight
Output Shaft Size
5/8 in Straight - Square Key
Mounting Type
5-Bolt - 1.239 in Pilot
Seal Type
Standard
Case Drain
3/8–24 UNF-2B SAE O-Ring Ports
Inlet and Outlet Port Size
Straight Thread O-ring SAE 9/16-18 UNF-2B Ports Size 6
Actual Port Type
.5625-18 Unf-2B Sae O-ring Port, End Ported
Actual Output Shaft
Dia 15.88 [.625] Straight With Straight 4.72 [.186] Sq Key With .250-28 Threaded Hole
Actual Mounting Flange
5 Bolt: Dia 31.47 [1.239] X 5.1 [.20] Pilot .250-28 Unf Mounting
Maximum Operating Temperature
180 °F
Overall Height
2.53 in
Overall Length
5.06 in
Overall Width
2.38 in
Intermittent Flow Rate
6.5 gpm
Intermittent Pressure
2400 psi
Peak Pressure
3190 psi
Intermittent Torque
263 in
Peak Torque
321 in
Replacement Buna Seal Kit - Sold Separately
002 Design - 60580-000
Replacement Bearing Race - Sold Separately
002 Design - 16241-C1220
Replacement Needle Thrust Bearing
002 Design - 16241-1220
Replacement Output Shaft - Sold Separately
002 Design - 201354-001
Replacement Geroler - Sold Separately
002 Design - 201404-002
Replacement Drive - Sold Separately
002 Design - 23017-002
Replacement Drive Spool - Sold Separately
002 Design - 23016-002
Replacement Short Cap Screw (Mounting End) - Sold Separately
002 Design - 16148-424 - 5 Required
Replacement Housing, Bearing Side (Front) - Sold Separately
002 Design 201334-001
Replacement Rear Housing - Sold Separately
002 Design - 201333-001
Replacement Mounting Flange - Sold Separately
002 Design - 2 Bolt Kit 60552
Weight
4.6 lbs
Recommended Fluids
Premium Quality, Anti-Wear Type Hydraulic Oil with A Viscosity Of Not Less Than 701 Sus or 13Cst with Best Range Of 100 - 200 Sus or 20 - 43 Cst At Operating Temperature,
Recommended Filtration
Per Iso Cleanliness Code. Level 18/13
Repair Manual#
7-144
Repair Parts Drawing#
6-01-147
Manufacturer Product Page
Click here
Manufacturer Catalog
Click here
Parts and Repair Manual
Click here
Product Brochure
Click here
Maximum Continuous Oil Viscosity
70 Saybold universal second
Maximum System Operating Temperature
-34°C to 82 °C
Port Configuration
.5625-18 UNF-2B SAE O-Ring Ports